|
|
 |
 |
 |
 |
 |
 |
 |
|
|
|
|
|
 |
GO TO: ELASTOMERIC SPECIALTY
COATINGS PRODUCTS PAGE |
 |
| MISCELLANEOUS SPECIALTY PAINTS, COATINGS &
PRODUCTS |
 |
|
| 9700 |
AQUAMEND™ |
Epoxy
Based Hand-Kneadable Putty that mixes in one minute for Permanent Repairs to Damp,
Wet Areas and Underwater Substrates. |
Clear |
| Gloss |
Click for More Details |
Data/MSDS |
|
| 5410 |
CRETE-MOD™ |
Acrylic Polymer Waterproofing Cement Modifier
Strengthener for Trowelable Mortar,
Cement, Masonry & Stucco Mixtures. |
CLEAR |
|
Click Here for More Details |
Data/MSDS |
|
| 515 |
PERMAGLAZE™ |
Acrylic
Epoxy Finish, Decorative Sealer, Preservative & Non-Yellowing
Penetrating Clear Gloss Finish. |
Clear |
| Gloss |
Click for More Details |
Data/MSDS |
|
| 7900 |
PERMAUREA™ |
Single
Component Waterbased 40% Solids POLYUREA Coating & Performance Additive for Most
Surfaces. |
Clear |
| Gloss |
Click for More Details |
Data/MSDS |
|
| 2595 |
CHALK
FORCE™ |
Acrylic-Epoxy
Chalk Sealer, High pH Sealer and Surface Conditioner for Concrete & most other
Surfaces. |
Clear |
| Click Here for More Details |
Data/MSDS |
|
| 2795 |
ULTRA
BLOCK™ |
High
Solids Clear Bonding Adhesive High Performance
Surface Conditioner, Stain Blocker, Wood &
Metal Primer Sealer. |
Clear |
|
Clear |
Click for More Details |
Data/MSDS |
|
| 2585 |
SUPER
BLOCK™ |
High
Solids White (Tintable) Pigmented Interior and Exterior Primer, Stain Killer and Wood
Sealer. |
White
(Tintable) |
| Flat |
Click for More Details |
Data/MSDS |
|
| 2740/1 |
STUKKOPATCH™ |
Pre-Mixed,
Ready-to-Use, Acrylic Waterproofing Stucco Look Textured Repair Patch, Crack Sealer &
Caulk. |
White |
| SAND or ROUGH - Click for
Details |
Data/MSDS |
|
| 5450 |
CRETE-GRIP™ |
Acrylic
Adhesive Primer and Troubleshooting Bonder for Most Coated & Uncoated Deck/Floor
Surfaces. |
CLEAR |
| Click Here for More Details |
Data/MSDS |
|
| 5875 |
ACRATHANE™ |
Acrylic
Penetrating Concrete Stain, Sealer, Preservative & Paint. Commercial Grade |
White/WB/DB/CB |
| Satin |
Click for More Details |
Data/MSDS |
|
| 4750 |
AQUAKOTE™ |
Acrylic Penetrating Concrete Stain, Sealer, Preservative & Paint. Industrial Grade |
White/WB/DB/CB |
| Satin |
Click for More Details |
Data/MSDS |
|
| 5840 |
ULTRATHANE-40™ |
Industrial
100% Urethane 40% Solids Clear Sealer Finish. Excellent Durability & Chemical
Resistance. |
CLEAR |
| Gloss |
Click for More Details |
Data/MSDS |
|
| 9250 |
SKID-EX™ |
Anti-Skid,
Anti-Slip Additive for Reducing Slip & Skid in Clears, Stains, Paints and Floor
Coatings. |
CLEAR |
| Click Here for More Details |
Data/MSDS |
|
| 407x |
METALUX™
ENAM |
Acrylic
Latex Enamel Metallic-Look Finish Industrial Protective Coatings. |
List of Colors |
| S/Gloss |
Click for More Details |
Data/MSDS |
|
| 490x |
SURE-LINE™ |
Fast
Drying, Heavy Bodied Acrylic Traffic Marking Paint that has excellent durability. Inquire
about Colors. |
WHITE/YELLOW |
| Flat |
Click for More Details |
Data/MSDS |
|
| 9600 |
DIAMOND
DUST™ #20 |
Clear
Mica Chips for adding a Sparkle and Glitter Effect to the surface of most any paint or
coating. |
Clear
Mica |
| Click Here for More Details |
Data/MSDS |
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
AQUAMEND™ WET-SURFACE
TWO PART EPOXY REPAIR TUBES |
 |
#9700-1 (1-4 Ounce Tube),
#9700-C (Case of 12-4 Ounce Tubes) |
Data/MSDS |
| Epoxy Based Hand-Kneadable
Putty that mixes in one minute for Permanent Repairs to Damp, Wet Areas
and Underwater Substrates. For Fiberglass, Metal, Wood, Concrete, Glass, Etc. |
TECH DATA: n/a |
|
|
CRETE-MOD™
ACRYLIC
POLYMER CEMENT MODIFIER |
|
 |
#5410-1 (1 Gallon)
#5410-5 (5 Gallon)
#5410-55 (55 Gallon) |
Data/MSDS |
| Quality
Low Odor Acrylic Polymer Additive Cement Modifier
for Strengthening and Waterproofing most any Cementitious Mixture
including Cement, Masonry, Stucco, Trowelable Mortar and Spray Crete
Deck Finishes. Excellent Waterproofing
Ultraviolet Resistant Binder Additive for
use in Concrete and Masonry Mixtures to Reduce Cracking
and Increase Strength and Durability. |
ADDITION
RATE: Approximately 2.5 Quarts per 50 pounds |
TECH DATA: Solids by Weight:
48%
Solids by Volume: 46%
Weight per Gallon: 8.8 lbs. |
|
|
PERMAGLAZE™ CLEAR GLOSS FINISH STONE GLAZE & SEALER |
 |
#515-1S (1 Gallon)
#515-C (Case of 6-1 Gallon Cans) Special Order Sizes Available |
Data/MSDS |
| Solution Acrylic, Mineral
Spirit Based, Epoxy Finish, Decorative Sealer and Preservative. Non-Yellowing
Penetrating Clear Gloss Finish. Can be used on most Hard Flooring Surfaces, including
Concrete, Masonry, Brick, Stone, Marble, Chattahooche and River Rock. Not
recommended for Driveways and other Vehicle Traffic areas. |
SPREAD
RATE: 200-300 square feet per gallon |
TECH DATA: Solids by Weight:
67% Solids by Volume:
47% Weight per Gallon: 11.9 lbs. |
|
|
PERMAUREA™ SINGLE COMPONENT POLYUREA COATING & ADDITIVE |
 |
#7900-1 (1 Gallon)
#7900-5 (5
Gallon) #7900-55 (55 Gallon) |
Data/MSDS |
| Single Component
Waterbased 40% Solids POLYUREA CLEAR Coating and Performance Additive for most any
surface. Can be added to most any latex product to increase performance of
adhesion, waterproofing, chemical resistance and durability. Excellent Resistance to
Chipping, Cracking, Peeling, Abrasion and Movement. Excellent Film Hardness with
Flexibility to provide Superior Adhesion, Waterproofing and Chemical and Abrasion
Resistance. |
SPREAD
RATE: 250-350 square feet per gallon |
TECH DATA: Solids by Weight:
40% Solids by Volume:
39% Weight per Gallon: 8.7 lbs. |
|
|
CHALK FORCE™ EPOXY
ACRYLIC CHALK & High-pH CLEAR SEALER |
 |
#2595-1 (1 Gallon)
#2595-5 (5 Gallon)
#2595-55 (55 Gallon) |
Data/MSDS |
| Quality Epoxy-Acrylic
Clear Finish Chalk Sealer and High pH Surface Sealer and Conditioner. Seals Chalky
Surfaces Providing a Firm Surface for Paints or Coatings. Seals High pH Cementitious
Surfaces Eliminating the Waiting Period for Concrete, Cement, Mortar and Stucco to Cure. |
SPREAD RATE: 300-400 square feet per gallon |
TECH DATA: Solids by Weight: 9%
Solids by Volume: 8%
Weight per Gallon: 8.9 lbs. |
|
|
 ULTRA
BLOCK™
CLEAR ADHESIVE, STAIN KILLER,
WOOD SEALER & METAL PRIMER
|
 |
#2795-1
(1 Gallon)
#2795-5 (5 Gallon)
#2795-55 (55 Gallon) |
Data/MSDS |
|
Ultimate High Performance, High Solids
Clear Acrylic Adhesive Primer,
Surface Conditioner, Stain Killer and Wood
Sealer. A High Solids Content Clear Primer
that effectively blocks and seals most stains and bleed
through including: water, lipstick, tobacco, nicotine, inks,
crayons, wood knots and sap streaks. ULTRA
BLOCK™ has excellent resistance to and sealing of tannin stains,
plus provides rust and corrosion resistance.
Excellent as a wood primer on most previously
coated or uncoated wood surfaces. |
SPREAD RATE: 75-150
square feet per gallon |
TECH DATA: Solids by Weight:
48%
Solids by Volume: 42%
Weight per Gallon: 8.75 lbs. |
|
|
SUPER BLOCK™ INT-EXT
WHITE PRIMER, STAIN KILLER & WOOD SEALER |
|
#2585-1 (1 Gallon)
#2585-5 (5 Gallon)
#2585-55 (55 Gallon) |
Data/MSDS |
| Superior Quality, High
Solids White (Tintable) Pigmented Interior and Exterior Primer, Stain Killer and Wood
Sealer. A High Solids Content Primer that comes standard in White, but can be tinted or
matched to most Pastel, White and Tint Base Colors. Effectively blocks and seals most
stains and bleedthrough including: water, lipstick, tobacco, nicotine, inks, crayons, wood
knots and sap streaks. SUPER BLOCK™ has excellent resistance to and sealing of tannin
stains. Provides a Sealed Surface for Paints or Coatings. Seals High pH Cementitious
Surfaces Eliminating the Waiting Period for Concrete, Cement, Mortar & Stucco to Cure.
Do not use on unprimed METAL surfaces; See METAL-PRIME RED-OX™
Primer. |
SPREAD
RATE: 200-300 square feet per gallon |
TECH DATA: Solids by Weight:
52% Solids by Volume:
46% Weight per Gallon: 10.2 lbs. |
|
|
STUKKOPATCH™ CEMENTITOUS SURFACE REPAIR & PATCH COMPOUND |
|
#2740X-1 (1 Gal.)
#2740x-5 (5 Gal.) #2740x-T (10.1 Oz.
Tube) #2740x-C (Case 12 Tubes) |
Data/MSDS |
| Pre-Mixed, Ready-To-Use, Waterproofing Acrylic Stucco Finish
Textured Repair Patch, Crack Sealer & Caulking Compound for Chips, Cracks, Fractures
and Imperfections in Stucco, Masonry, Cement and most other Surfaces. Specify Sand(2740)
or Rough(2741) Texture Finish. |
SPREAD
RATE: 25-50 square feet per gallon |
TECH DATA: Solids by Weight: 88%
Weight per Gallon: 12.5 lbs. |
|
|
CRETE-GRIP™ ADHESIVE PRIMER & TROUBLESHOOTING DECK BONDER |
|
#5450-1 (1
Gallon) #5450-5 (5
Gallon) #5450-55 (55 Gallon) |
Data/MSDS |
| CRETE-GRIP™
is a clear, non-pigmented finish, acrylic adhesive, high-performance uncoated concrete and
previously coated concrete or deck surfaces, penetrating primer and troubleshooting
bonder. This is a low V.O.C. waterborne formulation of acrylic resin with high technology
fluorosurfactants which provides for exceptional adhesion, penetration and bonding
properties. Excellent penetration on porous surfaces and superior adhesion on non-porous
or compatible previously coated surfaces. Check for compatibility on previously coated
surfaces. Easy Application and Water Clean Up. |
SPREAD RATE: 300-400 square feet per gallon |
TECH DATA: Solids by Weight:
65% Solids by Volume:
65% Weight per Gallon: 8.4 lbs. |
|
|
ACRATHANE™ CONCRETE STAIN & FLOOR PAINT (COMMERCIAL GRADE) |
SATIN |
#5875-1 (1 Gallon)
#5875-5 (5 Gallon)
#5875-55 (55 Gallon) |
Data/MSDS |
| COMMERCIAL
GRADE - Waterbase Acrylic Penetrating Concrete Stain, Sealer,
Preservative and Concrete Paint. Effectively Protects against Efflorescence, Chalking,
Erosion & Cracking. For Uncoated or Previously Coated/Stained Surfaces. Excellent
Adhesion with Abrasion, Chemical, U.V., and Hot Tire Pick Up Resistance. Check for
compatibility on previously coated surfaces. Easy Application and Water Clean Up. |
 |
WHITE/WHITE Base/DEEP Base/CLEAR Base
- SPREAD RATE: 300-400 square feet per
gallon |
TECH DATA: Solids by
Weight: 41% Solids by Volume:
31% Weight per Gallon: 10.3 lbs. |
|
|
AQUAKOTE™ CONCRETE STAIN & FLOOR PAINT (INDUSTRIAL GRADE) |
SATIN |
#4750-1 (1 Gallon)
#4750-5 (5 Gallon)
#4750-55 (55 Gallon) |
Data/MSDS |
| INDUSTRIAL
GRADE - Waterbase Acrylic Penetrating Concrete Stain, Sealer,
Preservative and Concrete Paint. Effectively Protects against Efflorescence, Chalking,
Erosion & Cracking. For Uncoated or Previously Coated/Stained Surfaces. Excellent
Adhesion with Abrasion, Chemical, U.V., and Hot Tire Pick Up Resistance. Check for
compatibility on previously coated surfaces. Easy Application and Water Clean Up. |
 |
WHITE/WHITE Base/DEEP Base/CLEAR Base
- SPREAD RATE: 300-400 square feet per
gallon |
TECH DATA: Solids by
Weight: 44% Solids by Volume:
33% Weight per Gallon: 10.2 lbs. |
|
|
ULTRATHANE-40™ 100% URETHANE 40% SOLIDS CLEAR GLOSS SEALER |
|
#5840-1 (1 Gallon)
#5840-5 (5
Gallon) #5840-55 (55 Gallon) |
Data/MSDS |
| High Performance
Industrial Grade 100% Urethane 40% Solids Clear Gloss Sealer Finish. Excellent Durability,
Gloss, U.V. Resistance and Excellent Chemical Resistance. Can be used on most any Interior
or Exterior Coated or uncoated Substrates. Concrete, Masonry and Cementitious Surfaces
must be Previously Sealed, Primed or Coated. Excellent for use on Properly Prepared HARD
WOOD Decks and Surfaces. Gas, Fuel, Oil and Chemical Containment Coating.
ULTRATHANE-20™ 100% Urethane 20% Solids Commercial Grade Sealer Also Available. |
SPREAD
RATE: 300-350 square feet per gallon |
TECH DATA: Solids by Weight:
40% Solids by Volume:
38% Weight per Gallon: 8.8 lbs. |
|
|
SKID-EX™ CLEAR
SAND NON-SKID & NON-SLIP RESISTANCE ADDITIVE |
|
#9250-1 (8 ounces)
#9250-5 (40 Ounces) |
Data/MSDS |
| An Anti-Skid, Anti-Slip
Additive for use in most any Latex based Clear Coat, Paint or Stain. For Reducing Slip and
Skid on Slippery Coated Surfaces. This Product will help reduce slip but is NOT Guaranteed
to Eliminate Slipping or Falling. |
RECOMMENDED ADD LEVELS: 8 to 16 Ounces per Gallon - 40 to 80 Ounces per Five Gallons |
|
|
METALUX™ ENAM LATEX
ENAMEL METALLIC LOOK FINISHES |
#4075 SILVER #4076 BRASS #4077 BRONZE #4078 COPPER #4079 GOLD |
| SPECIFY: MATTE(m) or SEMI-GLOSS(G) -
Many Other Designer Metallic Finishes and Colors Available |
 
 
|
#407x-5x (5 Gallon)
#407x-55x (55 Gallon) |
Data/MSDS |
| Quality Acrylic Latex
Enamel Metallic Look Decorative Industrial Coating. Excellent Durability and Beautiful
MATTE or SEMI-GLOSS Finish. Many other Decorative Metallic Look and Metal Flake
Colors Available. |
SPREAD RATE: 200-300 square feet per gallon |
TECH DATA: Solids by Weight: 47%
Weight per Gallon: 10.1 lbs. |
|
|
SURE-LINE™ TRAFFIC MARKING and PARKING LOT STRIPING PAINT |
 |
- WHITE: #4900-1 (1 Gallon)
#4900-5 (5 Gallon)
#4900-55 (55 Gallon)
- YELLOW: #4905-1 (1 Gallon)
#4905-5 (5 Gallon)
#4905-55 (55 Gallon)
|
Data/MSDS |
| Superior Quality Heavy
Bodied Acrylic Traffic Marking Paint that has excellent resistance of weather, water, oil,
grease, and chemicals. Fast Drying for Parking Lots, Roadways, Warehouses, Airfields, Etc.
Available in White and Yellow, but inquire for additional SURE-LINE Colors. |
SPREAD
RATE: 125-175 square feet per gallon |
TECH DATA: Solids by Weight: 51% +/-
2% |
|
|
DIAMOND DUST™ CLEAR
DECORATIVE SPARKLE GLITTER CHIPS (#20) |
|
#9600-1 (1 Pound)
#9600-5 (5 Pounds) |
Data/MSDS |
| Clear Mica Chips for
adding a Sparkle and Glitter Effect to the surface of most any paint or coating. Applied
to the wet surface of a freshly painted or coated horizontal or vertical surface by
machine or manual application. |
COVERAGE:
Approximately 1 pound Diamond Dust per 500 square feet of surface area |
TECH DATA: Diamond Dust Mica #20 |
|
|
|
|
|
-
      
NATIONWIDE's CONTACT INFORMATION:
Business Hours: (M-F 8am-5pm EST) |
Telephone: 941.753.7500 U.S.
Toll Free: 1.800.423.7264
Fax: 941.753.1773 (24 Hour Dedicated Fax) |
 |
NATIONWIDE
CHEMICAL COATING MFRS., INC. |
 |
7106 24th Court East |
Sarasota,
Florida 34243 U.S.A. |
E-mail: info@natcoat.net
Web: webmaster@natcoat.net |
|
 |
Directory of
Nationwide Sales Associates |
 |
EXCLUSIVITY:
Some
Nationwide Products are sold Exclusively by Dealers and/or Distributors in Select Areas
and Regions. |
LEAKS:
Leaks
resulting from acts of providence, owner or their agents, are not the responsibility of NCCMI
and under no circumstances shall NCCMI
be liable in any respects to the building, it’s
occupants, it’s
contents or for any consequential or incidental damages. Leaks are required to be repaired
prior to the application of any coating and therefore are not covered under any warranty. |
| LABOR:
Products
Warranties are Limited to Material Only (see Limitations below), Labor is not included.
Nationwide does not Warranty for Labor of any Kind. |
| LIMITATIONS:
Any
implied warranty, including warranty of fitness for a particular use
or purpose, and warranty of merchantability, is limited in duration to the express
warranty based on the Individual Product's Warranty, unless a shorter period is
permitted
by law. If no Warranty is stated for a specific product then the maximum warranty will be
One Year from date of Purchase. If a Product has a specific Warranty and a Warranty was
not applied for using a Warranty Registration Certificate, the maximum warranty will be
One Year from Date of Purchase. NCCMI shall not be liable for incidental
or consequential damages or for damage to the building, it’s
contents, or it’s
occupants. NCCMI's
liability is limited to the
reasonable replacement cost of product that has been fully paid for and shall be limited
to defective product in the affected area only, whether any claim against it
is based upon strict liability, negligence, breach of warranty or any other theory or
cause of action. Venue in reference to any Product of Nationwide shall be Manatee County,
Florida, U.S.A. |
| DISCLAIMER:
Information
presented on this Web Page or any other Web Page on Nationwide Chemical Coating Mfrs.,
Inc. Web Site has been compiled by sources to be reliable, and is accurate and reliable to
the best of our knowledge and belief, but is not guaranteed to be so. |
|
Copyright
©1998-2011 NATIONWIDE
CHEMICAL
COATING MFRS., INC. |
|
| www.nationwidecoating.com -
www.nationwidecoatings.net
- www.natcoat.net
- www.acrylocoat.com |
This Page was last updated on
Friday, August 19, 2011 |
|
